МС 5117-2 HIGH-TEMPERATURE GREASE

DIN 51502/51825 KP2R-10

The grease is designed for long-term service in low- and middle-velocity units and bearings exposed to high temperature and shock loads (e.g., pellet mills) . It is characterized by particularly high anti-oxidative properties.

МС 5117-2 is multi-purpose ЕР grease based on complex lithium thickener. Contains anti-friction and extreme pressure additives.

Color light brown / yellow visually
Appearance homogeneous tacky mass visually
Type of thickener Li-Complex -
Base oil kinematic viscosity at 40 °C, cSt 680 ISO 3104
Dropping point °С, not less than 280 ASTM D 2265
NLGI consistency grade 2 -
Penetration at 25 °C, 1/10 mm 265-295 ASTM D 217
Oil separation, %, not more than 12 GOST 7142
Water washout (from bearing) at +79 °С, %, not more than 3,0 ASTM D1264
Minimum application temperature in automated centralized lubrication systems, °С -5 -
Accelerated metal corrosion test passes GOST 9.080
Weld point, kgf, not less than 335 ASTM D 2596
Last nonseizure load, kgf, not less than 100 ASTM D 2783
Scar diameter (392 N,1 hour) not more than, mm 0,6 ASTM D 2266

Акт испытаний от ООО "Сургутмебель" PDF

Акт испытаний от ООО "Лесресурс" PDF

Акт испытаний от ООО "СибЛесКарбо" PDF

Акт испытаний от ПУП "Цветмет" PDF

Акт испытаний от ЗАО "Лесозавод 25" PDF

Акт испытаний от ООО "Мир гранул" PDF

Акт испытаний от ООО "Владимир" PDF

Акт испытаний от ЗАО "Новооскольский ККЗ" PDF

Акт испытаний от ООО "Топкинский цемент" PDF