SG 460 UREAGREASE GREASE SERIES
СТО 82156803-011-2017
SG UREAGREASE 460 series includes high-quality multi-purpose greases with perfect anti-oxidant and low-ash performance, based on mix of mineral and naphthenic oils with use of polyurea thickening agent.
SG UREAGREASE 460 greases are designed for heavy-duty low-velocity roller & plain bearings, ball joints and sliding surfaces of components used in metallurgical equipment.
| Properties | method | SG 460 UREAGREASE EP0 | SG 460 UREAGREASE EP1 | SG 460 UREAGREASE EP2 |
| Appearance | visually | homogeneous tacky mass | homogeneous tacky mass | homogeneous tacky mass |
| Type of thickener | - | polyurea | polyurea | polyurea |
| Base oil kinematic viscosity at 40 °C, cSt | ISO 3104 | 460 | 460 | 460 |
| Dropping point °С, not less than | ASTM D2265 | 300 | 300 | 300 |
| NLGI consistency grade | - | 0 | 1 | 2 |
| Penetration at 25 °C, 1/10 mm | ASTM D217 | 355-385 | 310-340 | 265-295 |
| DIN | 51 502/51 825 | KP 0 S-30 | KP 1 S-30 | KP 2 S-20 |
| Weld point, kgf, not less than | ASTM D2596 | 266 | 266 | 266 |
| Last nonseizure load, kgf, not less than | ASTM D 2783 | 119 | 119 | 119 |
| Scar diameter (40 kgf, 1 hour) not more than, mm | ASTM D2266 | 0,5 | 0,5 | 0,5 |
* According to customer’s specification, base oil viscosity at 40 0C can be changed to 68, 150, 460, 680, 1200 mm2/s.
Декларация о соответствии ТР ТС 030/2012 PDF