SG 100-200 GREASE SERIES (EP1, EP2, EP3)

Forms stable dividing film between friction surfaces
PDF PRINT
SG 100-200 ЕР
  • sg 100-200 ЕР
  • sg 100-200 ЕР
  • sg 100-200 ЕР
  • sg 100-200 ЕР

MAIN PROPERTIES

  • from -30°C to +130°C Temperature range
  • +200°C Dropping point °С, not less than
  • 100/200 Base oil kinematic viscosity at 40 °C, cSt
  • 1/2/3 NLGI consistency grade

MAIN ADVANTAGES

  • High wear resistance
  • Multi-purpose
  • High water-resistance
  • High adhesion to metals
  • High anti-oxidative performance
  • May be used in centralized lubrication systems
  • High mechanical stability

СТО 82156803-009-2017

SG 100-200 EP lubricating greases are high-quality multi-purpose lubricants with perfect extreme pressure and antiwear performance, based on mix of high-viscosity mineral oils with lithium 12-hydroxystearate.

SG 100-200 EP series is designed for roller & plain bearings, ball joints and sliding surfaces of components used in metallurgical equipment.

Properties method SG 100 EP2 SG 100 EP3 SG 200 EP1 SG 200 EP2
Appearance visually homogeneous tacky mass homogeneous tacky mass homogeneous tacky mass homogeneous tacky mass
Type of thickener - lithium 12-hydroxystearate lithium 12-hydroxystearate lithium 12-hydroxystearate lithium 12-hydroxystearate
Base oil kinematic viscosity at 40 °C, cSt ISO 3104 100 100 200 200
Dropping point °С, not less than ASTM D2265 200 200 200 200
NLGI consistency grade - 2 3 1 2
Penetration at 25 °C, 1/10 mm ASTM D217 265-295 220-250 310-340 265-295
DIN 51 502/51 825 KP 2 M-30 KP 3 M-30 KP 1 M-20 KP 2 M-20
Weld point, kgf, not less than ASTM D2596 280 280 280 280
Last nonseizure load, kgf, not less than ASTM D 2783 80 80 80 80

Декларация о соответствии ТР ТС 030/2012 PDF

SUBSTITUTE GREASES:

* before using as a substitute consult with our specialist, please

  1. ASK A SPECIALIST
  2. REQUEST A SAMPLE